Control of liquids

Float levels switch

BLR

Intended use:

Model with thread process connection.

The side mounting level switches are used to control the level in tanks and containers in which non-scaling or residual waters, oil, chemical products, etc. are used. 


Function:

When the level of the liquid reaches the level of the float switch, the float changes its position an angle and activates a micro switch or a REED switch in high temperature models due to this deviation.
When the liquid level falls, the float moves back and the switch is disengaged. 

Mechanical connection:

There are models with proccess connection like circular flange, square flange or by thread.

Mount the indicator using screws, rods, fasteners, nuts, using the counterflange or through connecting pipe.

If the model of the float is BLR or BLR-T, the thread is G 1 " 1/2 tappered and the device can be fixed using 1 or 2 nuts or screwing the float in a pipe.

For a correct use of the level switch, the float must not touch the walls of the tank and it is necessary to ensure the free movement of the float. 

Dimensions:

Approximate measures are given in mm. 

 

 

 

Technical data:

Name Float switch  
Type BLR ref: 2514
Product density 0.65 kg/l  
Maximum pressure +15 bar  
Cable entry G 1/2 "  
Switching voltage 250 V AC  
Switching function 1 NO + 1 NC  
Capacity of the contact 5 A / 250 V AC
(for resistive loads)
For inductive or capacitive loads, reduce at 50%
 
Ambient temperature -20 °C ... +100 °C  
Protection IP65 according DIN EN60529  
Weight 1.10 kg  
Materials:    
Housing Aluminium  
Proccess connection Stainless Steel 1.4401  
Float Stainless Steel 1.4401