111

Control of solids and liquids

Capacitive level indicators

SCP 30 PYN

Intendend use:

Simple model with 2 wires cable output and threaded body and PNP or NPN output selection. A load must be connected por a proper use.

The capacitive levels indicators SCP 30 PYN are to be used to control the maximum or minimum level of liquid like water, oil, chemical products, etc., in tanks or recipients or control the maximum or minimum level of bulk solids like feed, cereal, grain, etc., in silos or vessels. These devices also control the flow of these materials in pipes or are to be used to detect conductive or non-conductive materials through non- conductive walls.

The output of the devices are protected against overloads and short- circuits. Due to the encapsulation of the controllers, the devices are immune to noise or electrical interferences from mobiles, motors, etc. 


Function:

When the level of product reaches the controller, the electronic unit reverses the signal due to a change of the capacity of the environment. When the product disappear from the detection range, the signal turns to the initial position. 

Mechanical connection:

The standard form is mounting the device with the nuts or with the mounting accesory under request.

Drill a Ø 30 mm hole into the tank or silo wall, polish it, place the device and fixing it with the nuts or screw it into a flange or into an appropiate support to fix it.

If the mounting is made with the mounting accesory, drill a G 1 " 1/4 hole into the tank or silo wall, fix the accesory and screw the device on it. Under request there are Galvanized or Stainless Steel G 1 " 1/4 nuts to fix the accesory to the interior of the wall as counter-nut. 

Dimensions:

Approximate measures are given in mm. 

 

 

 

Technical data:

Name Capacitive level indicator  
Type SCP 30 PYN ref: 2803-0-002
Supply voltage 10 ... 30 V DC  
Output type NO or NC depending on the selector  
Current output 300 mA  
Maximum voltage drop < 2 V DC  
Maximum ondulation < 10 %  
Sensitivity Adjustable 0 ... 20 mm depending on the material. Pre-adjusted to detect grain  
Product temperature -25 °C ... +70 °C  
Protection IP67 according DIN EN60529  
Weight 0.27 kg  
Cable output Connector M12, with a cable of 3 wires x 2 meters  
Materials:    
Housing Reinforced plastic  
Cable Double isolation PVC  
Accesory (under request) PVC