111

Control of solids

Swiveling levers

SES

Intended use:

The swiveling lever in the different models SES with microswitch, SIS with inductive sensors and SNS with NAMUR sensors are to be used to signal and ensure the connection of hose in silo or deposit installations or any other tranport system. 


Function:

While coupling the counter coupling or hose coupling, the lever is swivelling besides and the limit switch will be actuated.

At the ending of the coupling, the lever moves back to the initial position and the switch is disengaged.

In addition, there is a hole to place a security padlock if required. 

Mechanical connection:

Mount the indicator using the round steel shackle over the tube.

The lever must be installed over the connection, approximately at medium height and when it is mounted to inclined or horizontal tubing, the swivelling lever limit switch always must be mount on the top side. The lever must fall trough his own weight in the drafted final position. 

Dimensions:

Aproximate measures are given in mm. 

 

 

 

Technical data:

Name Swiveling lever  
Type SES DN... ref: 2902-0-...
  SIS DN... ref: 2902-1-...
  SNS DN... ref: 2902-2-...
Contact voltage:    
SES 10 ... 250 V AC (50 ... 60 Hz)  
  10 ... 250 V DC  
Supply voltage:    
SIS 10 ... 30 V DC  
SNS 8 V DC  
Contact function:    
SES 1 NO + 1 NC  
SIS PNP (NA)  
SNS NA  
Cable output 5 metres (Under request 2 meters or 10 meters)  
Maximum voltage 250 V AC, 250 V DC  
Capacity of the contact SES 1.5 A / 250 V AC (for resistive loads)
For inductive or capacitive loads reduce at 50%
 
Current of the contact SIS 200 mA (for resistive loads)
For inductive or capacitive loads reduce at 50%
 
Ambient temperature:    
SES -25 °C ... +70 °C  
SIS and SNS -20 °C ... +60 °C  
Protection:    
SES and SIS IP67 according DIN EN60529  
SNS IP68 according DIN EN60529  
Weight 3 kg depending on the model  
Materials:    
Body Galvanized steel  
Cable Double insulation PVC